Gorget Premium step, pointed
|
The gorget has two parts: front and rear. The front part is stretched and pointed. There is a small step along the side of the gorget. The gorget looks especially nice when worn with shild-spaulders. The gorget can be used as a separate piece of armour, as well as a decoration to the clothing
All outer sides of the gorget are carefully rolled and have a thickness of 3-4 mm, which makes comfortable and safe for the wearer. It is especially important in the neck area. The gorget is anatomically formed has a fits nicely. There are two long and firm belts foreseen, made of natural black leather to fasten the pauldrons or spaulders on the gorget. From the inside the belts are extra processed to have thickness of 2.2 mm on their whole length.
The gorget is covered with rust-free paint from the inside.
The metal has the thickness of 1mm. LARP-Optima.
For our Plate Armour we use metal with the following characteristic:
C | Si | Mn | Ni | S | P | Cr | N | Cu | As |
---|---|---|---|---|---|---|---|---|---|
0,14 - 0,22 | 0,05 - 0,15 | 0,4 - 0,65 | max 0,3 | max 0,05 | max 0,04 | max 0,3 | max 0,008 | max 0,3 | max 0,08 |
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: