Cuirass "Lombard" 16Gauge (1,5mm steel)
|
This extravagant cuirass consists of two parts: the half brest plate and the two part back plate. All the parts are tied together by the belts. The cuirass covers the 2/3 of the torso, doesn't limit the mobility and allows making the fence movements. The cuirass can be used as an additional reinforcement to the gambeson, chainmail or brigandine.
As we care about our customers, who use our cuirasses, we use leather belts instead of hard metal straps in the shoulder area, because the metal parts are known to rub sore the shoulders.
The edges are carefully rolled and have a thickness of 3-4 mm, which makes them comfortable and safe as for the wearer, so for the teammates and opponents. Due to its anatomical form the halve cuirass fits perfectly without any additional mountings. The front and back plates are fastened to each other by belts made of natural black leather. From the inside the belts are extra processed to have thickness of 2.2 mm on their whole length This makes it possible to buckle them quickly and easily and to hide the rest of the belt.
The cuirass is coated with rust-free paint from the inside.
The metal has the thickness of 1,5 mm (16Gauge). SCA-Optima.
For our Plate Armour we use metal with the following characteristic:
C | Si | Mn | Ni | S | P | Cr | N | Cu | As |
---|---|---|---|---|---|---|---|---|---|
0,14 - 0,22 | 0,05 - 0,15 | 0,4 - 0,65 | max 0,3 | max 0,05 | max 0,04 | max 0,3 | max 0,008 | max 0,3 | max 0,08 |
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: